Good news for all supermarkets, petrol stations and refrigerated warehouses!
You can now save a cool 20 % in power and repair costs with the CUBE energy-saving-sensor
for refrigeration units.
Small investment, big impact
- CUBE consists of a closed box with special patented compound that simulates the chilled goods
- The CUBE energy-saving sensor is available in 3 sizes: EC101 (see figure) small sensors, EC102 medium-sized sensors and EC103 with large sensors
- The energy-saving-sensor constantly monitors the temperature of the chilled goods
- The system is installed as part of normal cold-rooms servicing
- The existing equipment is used
- Maintenance-free and indestructible (no electronics or moving parts)
- Availability: no restrictions
- Unlimited durability – can continue to be used even when refrigeration equipment is replaced
- Ten-year comprehensive warranty
A mini revolution in food refrigeration
With the CUBE energy-saving sensor, the actual temperature of the chilled goods gets imitated, rather than the air in the cold store. This enables an up to 20 % reduction in power costs, and consequently less time and expense required to service and repair refrigeration systems. The CUBE energy-saving sensor with special patented compound and temperature sensor is simply installed inside the refrigeration unit.
Traditional refrigeration cycle.
Sensor measure air temperature!
- Compressor starts when temperature rises above set value
- Up to 50 operation cycles (starts/stops) per day (depending on season)
- High energy consumption
Refrigeration cycle with CUBE.
Sensors mimic temperature 10 mm below the surface!
- Compressor starts when temperature rises
- No more than 15 operational cycles (starts/stops) per day (depending on season)
- Up to 20 % power saving
- Two Kelvins (degrees) cooler while also enabling slightly reduced/the same power consumption
- Up to 20 % reduction in power consumption, and thus fewer CO2 emissions.
Up to 20 % lower power costs
The saving
A reading at a large petrol station operator.
POWER SAVINGS
- Up to 65 % reduction in refrigeration cycles
- Longer lasting equipment and lower servicing costs
- Power consumption reduced by approx. 20 %
- ROI in maximum 24 months
The power saving is facilitated by the reduced number of refrigeration cycles. The graph here clearly shows the huge drop in refrigeration cycles following installation of the energy-saving-sensor, which gears the refrigeration process exclusively around the temperature of the chilled goods. The reason for the high number of refrigeration cycles on the left is the old approach of regulating temperature based on air movement within the refrigeration device, with every movement registered by the sensor triggering a refrigeration cycle.
Comparative readings during a six-month test phase at a supermarket chain.
ANNUAL COMPARISON FROM MAY TO AUGUST
- The sensors map the core temperature
- The compressor starts when the temperature rises
- No more than 15 operational cycles per day (depending on season)
- Power saving of up to 20 %
Power consumption and energy saving change throughout the year based on outdoor temperature. The greatest saving is naturally achieved when power consumption is highest due to elevated outdoor temperatures. For the rest, the degree of saving is also dependent on the condition and age of the refrigeration units: it is greater for older systems, whose basic consumption is higher, than for the latest systems.
Up to 20 % lower repair costs
Return on investment in 12 to 24 months
Return on investment is an essential parameter for assessing investment profitability. A value of between 12 and 24 months is considered a very good reference point in the industry. The substantial 12-month time span is due not to the basic costs for CUBE, but rather to the equipment available. For the rest, the exact ROI time frame can be determined very accurately in advance, because it is effectively based on the latest power-consumption reading and the data collected using CUBE, e.g. during a two-month test phase. So you know, right from the time of signing the contract, when you will start to earn a net profit from the investment.
Cooperation with the EG Group
Advantages clearly known
It is great to be able to do something good. Even more so if a partner fully recognises and responds to it. This is excellent form, but sadly no longer an everyday occurrence in the business world. So we were all the more pleased about an interview given by Dunja Honisch of the EG Group, clearly summarising the advantages of our CUBE energy-saving-sensor in an article for the company’s internal magazine, “eg für Sie”. “Investment costs paid off after twelve months; net profit for users for at least 14 years at the level of the investment costs.”
This clear support for CUBE and KAT (Kälte Aktiv Team) is all the more pleasing to us as we ourselves know Mrs Honisch to be a smart, critical negotiator for the EG Group. The Group operates around 1000 petrol stations in Germany under the names Esso and OMV, thus being one of the leaders in the sector here.
Experiences with CUBE
The CUBE energy-saving-sensor has been in use for a long time, and has proven its worth excellently all over the world. And for good reason, because the measurement readings show 10-20 % less power consumption and a reduction of up to 65 % in cycle numbers – with the same level of refrigeration.
NORMA
7-Eleven
Shell
eg-Group
SPAR
Jesper Kjærulff
COO, Founder and Owner
Frank Schyberg
CEO, Founder and Owner
IQ Cooling – energy efficiency
“IQ Cooling has since 2012 sold thousands of Cube units in more than 13 different European countries. As trusted advisor we have helped our clients in taking a valuable step towards lowering their carbon footprint and energy consumption while maintaining the same level of refrigeration performance. The principle is amazingly simple – and the effect astonishingly huge. Please contact us to hear about the benefits and our operational experiences.“
